Common ways of adding binder into charcoal powder for shaping

Update:2015-04-06 09:41:56 URL:http://www.telonmachine.com/en/article.php?name=20150406094119

Common ways of adding binder into charcoal powder for shaping

 

The charcoal product does not come off after using this binder, and it has a certain hardness, and short time to light, no smoke, no taste when burning and will not outfire midway, and can burn overall automatically.And the charcoal products will be formed in various shape, this binder will be use in charcoal products in large quantity.

 

 

The ratio of chemical substance is: charcoal powder 64.5%, 10water 25.8%, four glue 9.7%, 1.5combustion improver.


1.  putting water as fixed ratio into mixer and stiring with the some weighed binder, after stiring it will be the glue as standby application.


2. add the charcoal powder into the prepared equipment based on the fixed ratio, and add fit oxidizer(if the product is not used for BBQ charcoal not need to add), pour the glue into charcoal powder and stir.


3. It will be in next molding process, when holding the charcoal powder undispersed.


4. Taking out the evenly charcoal powder, after through the forming equipment, it will be made into various shapes of charcoal, then dry it.